131
Item Description
Adjust clock for
daylight saving time
changes
Adjust the system clock for daylight saving time changes, which means adding one
hour to the current system time.
Click
Adjust clock for daylight saving time changes
to expand the option, as
shown in
Figure 519
. Yo
u ca
n configure the daylight saving time changes in the
following ways:
• Specify that the daylight saving time starts on a specific date and ends on a
specific date. The time range must be greater than one day and smaller than
one year. For example, configure the daylight saving time to start on August 1st,
2006 at 06:00:00 a.m., and end on September 1st, 2006 at 06:00:00 a.m.
• Specify that the daylight saving time starts and ends on the corresponding
specified days every year. The time range must be greater than one day and
smaller than one year. For example, configure the daylight saving time to start
on the first Monday in August at 06:00:00 a.m., and end on the last Sunday in
September at 06:00:00 a.m.
Figure 519 Setting the daylight saving time
Configuring TR-069
TR-069 protocol, also called CPE WAN Management Protocol (CWMP), is a technology
specification initiated and developed by the DSL Forum. It defines the general frame, message
format, management method, and data model for the management and configuration of home
network devices in the next-generation network.
TR-069 is mainly applied to DSL access networks. In a DSL access network, user devices are large
in number and deployed separately usually in the customer premise. Therefore device management
and maintenance is hard to perform. TR-069 is designed to solve the problem by the idea of remote
central management of the Customer Premises Equipment (CPE) through an Auto-Configuration
Server (ACS).
To Next Page
Loading...
Need help?
General
