255
Figure 640 E1 parameters configuration page
• Select PRI Trunk Signaling for Working Mode.
• Select User Side Mode for ISDN Working Mode. (User Side Mode is the default setting)
• Select Line for TDM Clock Source.
• Click Apply.
# Add a local number: specify the number ID as 2000, the number as 20001234$, and the bound line
as 1/0 on the local number configuration page.
Configuring the system to first select VoIP entity
Configure Router A. Select Voice Management > Dial Plan > Number Match from the navigation
tree to access the number match configuration page.
To Next Page
Loading...
