HPE FlexNetwork MSR Series User Manual

256
Figure 641 Entity type selection priority rule configuration page (1)
• Configure the order of the voice entities in the Selection Sequence box: the first is VOIP, the
second is POTS, the third is VoFR, and the last is IVR.
• Click Apply.
After you dial 20001234 at Telephone A, the number will match call route 2000 (VoIP entity).
Configuring the system to first select POTS entity
Configure Router A. Select Voice Management > Dial Plan > Number Match from the navigation
tree to access the number match configuration page.
Figure 642 Entity type selection priority rule configuration page (2)
• Configure the order of the voice entities in the Selection Sequence box: the first is POTS , the
second is VOIP, the third is VoFR, and the last is IVR.
• Click Apply.
After you dial 20001234 at Telephone A, the number will match call route 1001 (POTS entity).

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English