296
# Specify TLS as the transport layer protocol for incoming SIP calls.
Select Voice Management > Call Connection > SIP Connection from the navigation tree,
and click the Session Properties tab to access the transport layer protocol configuration page
as shown in Figure 687.
Figure 687
Specif
ying listening transport layer protocol
a. Select TLS for SIP Listening Transport Layer Protocol.
b. Click Apply.
4. Specify the transport layer protocol on Router B. The configuration procedure is the same with
that on Router A.
Verifying the configuration
SIP calls from telephone 1111 to telephone 2222 are carried over TLS. You can view information
about TLS connections on the TLS Connection Information tab page by selecting Voice
Management > States and Statistics > SIP UA States from the navigation tree and clicking the
TLS Connection Information tab.
To Next Page
Loading...
