HPE FlexNetwork MSR Series User Manual

378
• Phone 5000 is not allowed to call phone 1000.
Figure 766 Network diagram
Configuring the local SIP server on Router C
# Configure the local SIP server to operate in alone mode.
1. Select Voice Management > SIP Local Survival > Service Configuration from the
navigation tree to access the following page.
Figure 767 Configuring alone mode
2. Select Enable for Server Running State.
3. Enter 2.1.1.2 in IP Address Bound to the Server.
4. Select Alone for Server Operation Mode.
5. Click Apply.
# Configure user 1000.
6. Select Voice Management > SIP Local Survival > User Management from the navigation
tree, and click Add to access the following page.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English