HPE FlexNetwork MSR Series

63
Item Description
SSID HIDE
• Enable—Disables the advertisement of the SSID in beacon
frames.
• Disable—Enables the advertisement of the SSID in beacon
frames.
By default, the SSID in beacon frames is advertised.
IMPORTANT:
• If the advertising of the SSID in beacon frames is disabled,
the SSID must be configured for the clients to associate
with the device.
• Disabling the advertising of the SSID in beacon frames
does little good to wireless security. Allowing the advertising
of the SSID in beacon frames enables a client to discover
an AP more easily.
Configuring advanced settings for clear type wireless service
1. Select Interface Setup > Wireless > Access Service from the navigation tree.
2. Click the icon for the target clear type wireless service.
Figure 41 Configuring advanced settings for a clear type wireless service
Table 41 Configuration items
Item Description
Client Max Users
Maximum number of clients of an SSID to be associated with the same
radio of the AP.
IMPORTANT:
When the number of clients of an SSID to be associated with the same
radio of the AP reaches the maximum, the SSID is automatically hidden.
Management Right
Web interface management right of online clients.
• Disable—Disables the Web interface management right of online
clients.
• Enable—Enables the Web interface management right of online
clients.
Configuring security settings for clear type wireless service
1. Select Interface Setup > Wireless > Access Service from the navigation tree.
2. Click the icon for the target clear type wireless service.