4. Operation of SEP Related Controllers
207
[Jog operation]
You can acquire position data via jogging operation.
Operation on the jog screen
[Jog-], [Jog+] : The axis jogs while each button is touched. [Jog-] moves the axis in
the negative direction, while [Jog+] moves the axis in the positive
direction.
[SV ON] : Touching [SV ON] while the servo is OFF turns on the axis servo
and becomes lit.
Touching [SV OFF] while the servo is ON turns off the axis servo
and becomes unlit.
[HOME] : Touching [HOME] while home return is not yet completed causes the
axis to return home and becomes lit.
[Chg Vel] : The jog speed changes in the order of 1, 10, 30, 50 and 100 mm/s
every time [Chg Vel] is touched.
[Inching] : Touching [Inching] changes to the inching screen.
Position acquisition operation
Touch [Teach]. A confirmation screen appears.
You can touch [] or [] to change the position number.
Touching [Yes] acquires the current position.
To Next Page
Loading...
