4. Operation of SEP Related Controllers
208
[Inching operation]
You can acquire position data via inching operation.
Operation on the jog screen
[Inching-], [Inching+] : Touching each button once moves the axis by inching.
[Inching-] moves the actuator in the negative direction.
[Inching+] moves the actuator in the positive direction.
[SV ON] : Touching [SV ON] while the servo is OFF turns on the axis servo
and becomes lit. Touching [SV OFF] when the servo is ON
turns off the axis servo and becomes unlit.
[HOME] : Touching [HOME] while home return is not yet completed causes
the axis to return home and becomes lit.
[Chg Dis] : The inching distance changes in the order of 0.01, 0.10, 0.50,
1.00 and 5.00 mm every time [Chg Dis] is touched.
[Jog] : Touching [Jog] changes to the jog screen.
Position acquisition operation
Touch [Teach]. A confirmation screen appears.
You can touch [] or [] to change the position number.
Touching [Yes] acquires the current position.
To Next Page
Loading...
