4. Operation of SEP Related Controllers
232
When the setting is complete, touch [Complete].
Touch [Back] to return to the previous screen.
Touch [Menu] to return to the initial setting menu screen.
All settings you have made under the selected operation
pattern become invalid.
Touch [Yes].
Touch [No] to return to the operation pattern selection
screen. All settings you have made under the selected
operation pattern become invalid.
Touch [Yes].
The controller is restarted.
The controller operates according to the operation pattern
settings you have made.
The display returns to the SEP menu screen.
Touch [No], and the controller will not operate according
to the operation pattern settings you have made until
restarted.
To Next Page
Loading...