IAI TB-02 - Page 297

5. Operation of MEC Related Controllers
285
No. Operation Screen Remarks
19 Touch the value field of
acceleration.
When the numeric keypad is
displayed, touch [0], [.], [3],
and then [ENT].
Touch [Menu] to return to the
position setting screen.
20 “0.30” is shown in the
acceleration field.
Touch [Menu] to return to the
position setting screen.
21 Touch the value field of
deceleration.
When the numeric keypad is
displayed, touch [0], [.], [3],
and then [ENT].
Touch [Menu] to return to the
position setting screen.
22 “0.30” is shown in the
deceleration field.
Touch [Menu] to return to the
position setting screen.
23 Touch [Menu]. Touch [Menu] to return to the
position setting screen.
24 Touch [Menu] to return to the
MEC menu screen.