Keysight Technologies C Series - Page 449

Keysight N9915-90020 User’s Guide 449
5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
Step 4: Select Polar Settings
Select one of the following display orientations:
Select Trace 6
—choose:
For this step, refer to
Figure 14-6 on page 429 and see also “How to Set Up
Phased Array Antenna Settings” on page 433.
— Polar Size Max Med Min
or
—
Polar Orientation or
—
Image Enable OFF ON or
—
Recall Image or
—
Compass Image OFF ON or
—
Compass North or
Step 5. Modify Scale and Attenuator Settings
To set the scan’s scaling and receiver corrections:
Learn more, see “How to select and edit corrections for Field Strength
measurements” on page 163
.
1. Press Scale/Amptd >Corrections then choose:
— Apply Corrections OFF ON
—
RcvrSide Antenna then choose:
— Antenna OFF ON
—
Edit Antenna
—
New
—
Save Antenna
—
Recall Antenna
—
Storage Device
— RcvrSide Cable then choose:
— Cable OFF ON
—
Edit Cable
—
New
—
Save Cable
—
Recall Cable