COMBI P0: Play Mixer T1–8, Mixer T9–16
131
0–8b:Control Assign
Control Assign [Mixer T1–8, Mixer T9–16, Mixer
Input, RT Control, External, Tone Adjust, KARMA]
This selects the items that will be controlled by the control
surface. You can also press one of the CONTROL ASSIGN
switches to make this selection.
For details on each selection, please see the explanations that
follow.
Mixer T1–8, Mixer T9–16
0–8c: Mixer T1–8, Mixer T9–16
Here you can adjust the volume of timbres 1–16, and switch
the Play/Mute and Solo On/Off status.
Use the CONTROL ASSIGN MIXER switch to select the
timbres to be controlled (1–8 or 9–16)
Timbre Play/Mute:
MIX PLAY/MUTE 1 (9)... 8 (16) switches
Use these switches to mute the corresponding timbres.
The switch LED will be lit for Play, or dark for Mutes status.
Timbre Play/Mute [Play, Mute]
This switches each timbre between Play or Muted status.
Timbre Solo:
Panel-Switch Solo Mode On and MIX PLAY/MUTE
1 (9)...8 (16) switches
Use the menu command Panel-Switch Solo Mode On to
specify whether the MIX PLAY/MUTE 1–8 switches will
control Play/Mute or Solo On/Off.
If Panel-Switch Solo Mode On is On (checked), these
switches will control Solo On/Off.
Tip: You can turn Panel-Switch Solo Mode On on/off by
holding down the ENTER switch and pressing numeric key
1.
Solo [Off, On]
This switches the Solo On/Off setting of each timbre.
Note: The Solo function applies to each timbre and the audio
inputs.
Note: The Solo On/Off setting is not preserved when you
write the combination.
Exclusive Solo
The menu’s Exclusive Solo parameter also affects the way
that Solo works. When Exclusive Solo is Off (unchecked),
you can solo multiple Timbres and Audio Inputs at once.
When Exclusive Solo is On (checked), only one Timbre or
Audio Input can be soloed at a time. In this mode, pressing a
SOLO button automatically disables any previous solos.
Tip: You can also toggle Exclusive Solo by holding ENTER
and pressing 2 on the numeric keypad.
0–8a
0–8b
0–8
Menu
0–8c
To Next Page
Loading...
Need help?
General
