SEQ P5–2: MIDI Filter 2 5–2–1: –5 T01–08, 5–2–2: –5 T09–16
239
SEQ P5–2: MIDI Filter 2
5–2–1: –5 T01–08,
5–2–2: –5 T09–16
5–2–1(2)a: Track Select, Tempo, RPPR
5–2–1(2)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 224.
5–2–1(2)c: MIDI Filter
Track 01 (Track Number):
Enable SW1 [Off, On]
Enable SW2 [Off, On]
Specifies whether or not the effect of the SW1 and SW2
switches will be received.
SW1 and SW2 are controlled by the KYBD-61/73/88’s SW1
and SW2 switches.
The function of these switches is specified in the P1: DT/
XY/Ctrls– Controllers Setup page.
These settings are valid if these keys are assigned to SW1
Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW
(CC#65).
Enable Foot Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be received. The function is assigned in Global
P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Foot Pedal [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be received. The function is assigned in Global
P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Track 02...08, 09...16 (Track Number):
These are the MIDI Filter 5 settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see “Track 01 (Track Number):,” above.
▼5–2–1(2): Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Rename Song ☞p.271
• 4: Delete Song ☞p.271
• 5: Copy From Song ☞p.271
• 6: Load Template Song ☞p.271
• 7: Save Template Song (Save as User Template
Song) ☞p.272
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: GM Initialize ☞p.273
• 11: Copy From Combi (Copy from
Combination) ☞p.273
• 12: Copy from Program ☞p.273
For more information, please see “Sequencer: Menu
Command” on page 271.
5–2
–1c
5–2
–1b
5–2
–1a
5–2
–1
Menu
To Next Page
Loading...
