Combination mode
174
7–4–2: Dynamic MIDI
Dynamic MIDI is a function that lets you use this
instrument’s controllers and MIDI control messages to
control specific KARMA functions.
For more information, please see “7–2–3: Dynamic MIDI” on
page 95.
7–4–2a: Combination Name, Tempo
For more information, please see “2–1(2)a: Combination
Name, Tempo” on page 147.
7–4–2b: Dynamic MIDI
Select (Perf RTP Select) [1–2, 3–4, 5–6, 7–8]
This selects the Dynamic MIDI parameters you’ll edit.
Input (Dynamic MIDI Input Module) [A…D]
Indicates either A, B, C, or D as the KARMA Module that
will be the Dynamic MIDI Source input.
MIDI control data that matches the In (Input Channel)
(Combi 7–1–1c) of the KARMA Module that you select here
will be used as the Source. If the Source is Note In Zone or
Note Out Zone, the zone will be the key zone (Combi 7–1–
1b) of the KARMA Module that you select here.
Source (Dynamic MIDI Source)
[Off, JS+Y (CC#01)…Velocity Outside Zone]
Action (Dynamic MIDI Range Action)
[Momentary, Toggle, Continuous]
Destination (Dynamic MIDI Destination)
[Off, RT Params Control…Buffer Latch]
Bottom (Dynamic MIDI Range Bottom)
[000…127]
Top (Dynamic MIDI Range Top) [000…127]
For more information, please see “Dynamic MIDI Sources &
Destinations” on page 601.
A/B/C/D [Off, On]
Specifies the Modules for which the Dynamic MIDI settings
will be valid.
On (checked): The Dynamic MIDI settings will be valid.
Off (unchecked): The Dynamic MIDI settings will be
ignored.
L (Last Triggered) [Off, On]
The Dynamic MIDI settings will be valid only for the last-
triggered KARMA Module A, B, C, or D. For example, this
allows you to assign different Modules to be triggered from
different parts of the keyboard, and depending on which
one was last triggered, route a Dynamic MIDI effect to it,
such as Direct Indexing.
Polarity (Dynamic MIDI Polarity) [+, –, +/–, –/+]
For more information, please see “Polarity (Dynamic MIDI
Polarity)” on page 95.
▼7–4–2: Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy KARMA Module ☞p.114
• 4: Initialize KARMA Module ☞p.115
• 5: Copy Scene ☞p.115
• 6: Swap Scene ☞p.115
• 7: Capture Random Seed ☞p.116
• 8: Copy from Program ☞p.185
For more information, please see “Combination: Menu
Command” on page 185.
7–4
–2a
7–4
–2
Menu
7–4
–2b
To Next Page
Loading...
Need help?
General
