Korg M3 - 5-1-5: -3 T01-08, 5-1-6: -3 T09-16

SEQ P5–1: MIDI Filter 1 5–1–5: –3 T01–08, 5–1–6: –3 T09–16
237
5–1–5: –3 T01–08,
5–1–6: –3 T09–16
Here you can enable transmission for the REALTIME
CONTROLS 1–4 sliders. The MIDI control messages of 1–4
sliders are fixed.
5–1–5(6)a: Track Select, Tempo, RPPR
5–1–5(6)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 224.
5–1–5(6)c: MIDI Filter 3
Track 01 (Track Number):
Enable Realtime Control Slider-1 [Off, On]
Specifies whether Slider 1 MIDI CC#74 (the M3’s filter cutoff
frequency) will be received.
Enable Realtime Control Slider-2 [Off, On]
Specifies whether or not Slider 2 MIDI CC#71 (the M3’s filter
resonance) will be received.
Enable Realtime Control Slider-3 [Off, On]
Specifies whether or not Slider 3 MIDI CC#79 (the M3’s filter
EG intensity) will be received.
Enable Realtime Control Slider-4 [Off, On]
Specifies whether or not Slider 4 MIDI CC#72 (the M3’s
filter/amp EG release time) will be received.
Track 02...08, 09...16 (Track Number):
These are the MIDI Filter 3 settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see “Track 01 (Track Number):,” above.
▼5–1–5(6): Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Rename Song ☞p.271
• 4: Delete Song ☞p.271
• 5: Copy From Song ☞p.271
• 6: Load Template Song ☞p.271
• 7: Save Template Song (Save as User Template
Song) ☞p.272
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: GM Initialize ☞p.273
• 11: Copy From Combi (Copy from
Combination) ☞p.273
• 12: Copy from Program ☞p.273
For more information, please see “Sequencer: Menu
Command” on page 271.
5–1
–5c
5–1
–5b
5–1
–5a
5–1
–5
Menu