Sequencer mode
236
5–1–3: –2 T01–08,
5–1–4: –2 T09–16
5–1–3(4)a: Track Select, Tempo, RPPR
5–1–3(4)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 224.
5–1–3(4)c: MIDI Filter 2
Track 01 (Track Number):
Enable JS X as AMS [Off, On]
Specifies whether or not MIDI pitch bend messages (the X
axis of the joystick) will be received to control the AMS effect
assigned to JS X. (This is not a filter for MIDI pitch bend
message reception.) For more information, please see
“Alternate Modulation Sources (AMS)” on page 587.
Enable JS+Y [Off, On]
Specifies whether or not MIDI CC#1 (the +Y axis of the
joystick, or a Modulation Slider Assign setting) will be
received.
Enable JS–Y [Off, On]
Specifies whether or not MIDI CC#2 (the –Y axis of the
joystick, or a Modulation Slider Assign setting) will be
received.
Enable Ribbon [Off, On]
Specifies whether or not MIDI CC#16 (the ribbon controller,
or specified as the assignment of a realtime modulation
Slider) will be transmitted or received.
Track 02...08, 09...16 (Track Number):
These are the MIDI Filter 2 settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see “Track 01 (Track Number):,” above.
▼5–1–3(4): Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Rename Song ☞p.271
• 4: Delete Song ☞p.271
• 5: Copy From Song ☞p.271
• 6: Load Template Song ☞p.271
• 7: Save Template Song (Save as User Template
Song) ☞p.272
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: GM Initialize ☞p.273
• 11: Copy From Combi (Copy from
Combination) ☞p.273
• 12: Copy from Program ☞p.273
For more information, please see “Sequencer: Menu
Command” on page 271.
5–1
–3c
5–1
–3b
5–1
–3a
5–1
–3
Menu
To Next Page
Loading...
Need help?
General
