PROG P0: Play OSC Mix
15
0–8b:Control Assign
Control Assign [OSC Mix, Mixer Input, RT Control,
External, Tone Adjust, KARMA]
This selects the items that will be controlled by the control
surface. You can also press one of the CONTROL ASSIGN
switches to make this selection.
For details on each selection, please see the explanations that
follow.
OSC Mix
0–8c: OSC Mix
OSC Mix lets you adjust the volume and change the Play/
Mute and Solo On/Off settings of oscillators 1 and 2 and the
drum track.
OSC Play/Mute:
MIX PLAY/MUTE 1, 2, 3 switches
The MIX PLAY/MUTE 1 and 2 switches will mute
oscillators 1 and 2. This is convenient when you’re editing a
program. The 3 switch mutes the drum track.
The switch LED will light to indicate Play status, or be dark
to indicate Mute status.
OSC1 Play/Mute [Play, Mute]
Play: Oscillator 1 will sound.
Mute: Oscillator 1 will be muted (silent).
OSC2 Play/Mute [Play, Mute]
Play: Oscillator 2 will sound.
Mute: Oscillator 2 will be muted (silent).
Note: OSC2 Play/Mute cannot be set for a program whose
Oscillator Mode is Single or Drums.
Drum Trk Play/Mute 1 [Play, Mute]
Play: The drum track will sound.
Mute: The drum track will be muted (silent).
OSC Solo:
Panel-Switch Solo Mode On and MIX PLAY/MUTE
1–6 switches
Use the menu command Panel-Switch Solo Mode On to
specify whether the MIX PLAY/MUTE 1–6 switches will
control Play/Mute or the Solo On/Off. If Panel-Switch Solo
Mode On is on (checked), the switches will control Solo On/
Off.
Tip: You can turn Panel-Switch Solo Mode On on/off by
holding down the ENTER switch and pressing numeric key
1.
OSC1 Solo [Off, On]
Switches the Solo status on/off for oscillator 1.
OSC2 Solo [Off, On]
Switches the Solo status on/off for oscillator 2.
Drum Trk Solo [Off, On]
Switches the Solo status on/off for the drum track.
0–8a
0–8c
0–8b
0–8
Menu
To Next Page
Loading...
Need help?
General
