SEQ P2: EQ/Option 2–3: EQ T01–08, 2–4: EQ T09–16
225
2–3: EQ T01–08,
2–4: EQ T09–16
Here you can make settings for the mid-sweepable three-
band EQ for each MIDI track.
2–3(4)a: Track Select, Tempo, RPPR
2–3(4)b:Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 224.
2–3(4)c: 3 Band Parametric EQ
Track 01 (Track Number):
High Gain [dB] [–18.0…+00.0…+18.0]
This controls the gain of the 10 kHz High Shelf EQ, in
increments of 0.5 dB.
Mid Freq [Hz] (Mid Frequency) [100…10k]
This sets the center frequency for the Mid sweep EQ.
Mid Gain [dB] [–18.0…+00.0…+18.0]
This controls the gain of the Mid Sweep EQ, in increments of
0.5 dB.
Low Gain [dB] [–18.0…+00.0…+18.0]
This controls the gain of the 80 Hz Low Shelf EQ, in
increments of 0.5 dB.
Track 02...08, 09...16 (Track Number):
These parameters adjust the three-band EQ (with sweepable
mid range) for MIDI tracks 2–8 and 9–16. They are the same
as for track 1. For more information, please see “Track 01
(Track Number):,” above.
▼2–3(4): Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Rename Song ☞p.271
• 4: Delete Song ☞p.271
• 5: Copy From Song ☞p.271
• 6: Load Template Song ☞p.271
• 7: Save Template Song (Save as User Template
Song) ☞p.272
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: GM Initialize ☞p.273
• 11: Copy From Combi (Copy from
Combination) ☞p.273
• 12: Copy from Program ☞p.273
For more information, please see “Sequencer: Menu
Command” on page 271.
2–5: RADIAS T01–08,
2–6: RADIAS T09–16,
2–7: RADIAS Vocoder 1,
2–8: RADIAS Vocoder 2
These settings will be available if the EXB-RADIAS option is
installed. Please see “EXB-RADIAS for M3 Manual” (PDF)
of the option CD-ROM.
2–3c
2–3a
2–3b
2–3
Menu
To Next Page
Loading...
Need help?
General
