Sampling mode
320
4–7: Pads 1–4 Setup,
4–8: Pads 5–8 Setup
Here you can specify the note numbers (and their velocities)
that will be produced by pads 1–8 in Sampling mode. You
can assign up to eight note numbers (and their velocities) to
each pad.
4–7(8)a: Pads 1
1[Off, C–1...G9 / 001...127]
2[Off, C–1...G9 / 001...127]
3[Off, C–1...G9 / 001...127]
4[Off, C–1...G9 / 001...127]
5[Off, C–1...G9 / 001...127]
6[Off, C–1...G9 / 001...127]
7[Off, C–1...G9 / 001...127]
8[Off, C–1...G9 / 001...127]
Off: Choose this if you don’t want the pad to play a note.
C–1…G9: Specify the note number you want to play.
001…127: Specify the velocity value.
For details on these settings and how to use the pads, please
see “1–7: Pads 1–4 Setup” on page 36 and “Note: Changing
velocity on the keyboard or pads” on page 299.
4–7(8)b: Pads 2...8
The parameters are identical to those for Pads 1, as
described under “4–7(8)a: Pads 1,” above.
▼4–7(8): Menu Command
• 0: Panel–SW Solo Mode On ☞p.329
• 1: Exclusive Solo ☞p.329
• 2: Delete Sample ☞p.329
• 3: Copy Sample ☞p.330
• 4: Rename Sample ☞p.330
• 5: Move Sample ☞p.330
• 6:
Sample Mono To Stereo (Change Sample
Type)
☞p.331
• 7: Delete MS (Delete Multisample) ☞p.331
• 8: Copy MS (Copy Multisample) ☞p.332
• 9: Rename MS (Rename Multisample) ☞p.332
• 10: Move MS (Move Multisample) ☞p.332
• 11: Convert MS To Program (Convert Multisample To
Program) ☞p.333
• 12: MS Mono To Stereo ☞p.333
• 12: MS Stereo To Mono ☞p.333
• 13: Optimize RAM ☞p.334
• 14: Select Directory ☞p.334
• 15: Keyboard Display ☞p.334
• 16: Auto Sampling Setup ☞p.334
For more information, please see “Sampling: Menu
Command” on page 329.
4–8a
4–8
Menu
To Next Page
Loading...
Need help?
General
