Combination mode
120
COMBI P0: Play
This is the main page of Combination mode. Among other
things, you can:
• Select combinations
• Select a program for each timbre, and specify its Play/
Mute and Solo On/Off status.
• Edit the KARMA function in simple ways
• Make audio input and resampling settings for use in
Combination mode
• Check the control surface content, and control it.
Tip: Auto Song Setup
The Auto Song Setup feature copies the current Program or
Combination into a Song, and then puts the M3 in record-
ready mode.
If inspiration for a phrase or song strikes you while you’re
playing, you can use this function to start recording
immediately. To do so:
1. Hold down the ENTER switch and press the
SEQUENCER REC/WRITE switch.
The Setup to Record dialog box will open and ask “Are you
sure?”
2. Press OK.
You will automatically enter Sequencer mode, and will be in
the record-ready state.
3. Press the START/STOP switch to start the sequencer
and begin recording.
For more information, please see “Tip: Auto Song Setup” on
page 192.
0–1: Program T01–08,
0–2: Program T09–16
This is the main page for selecting and playing
Combinations. You can also set the Program, Play/Mute,
and Solo On/Off for each of the Timbres 1–8 and 9–16.
For more information, please see “0–1: Program T01–08, 0–2:
Program T09–16” on page 120.
0–1(2)a: Combination Select
Bank [INT–A...INT–G, USER–A...USER–G]
This indicates the currently selected combination bank.
Press one of the BANK SELECT I-A–U-G switches to select
the desired bank.
• Each bank contains rewritable combination program
areas for 128 combinations (a total of 1,792).
Note: Pressing one of the BANK SELECT I-A–U-G switches
while the Program Select parameter is selected in this page
will change the timbre program bank (rather than the
combination bank).
Combination Select [000...127]
Here you can select the desired Combination.
To switch combinations
• Choose “Combination Select,” use numeric keys 0–9 to
input the desired combination number, and press the
ENTER switch.
• Choose “Combination Select” and turn the VALUE dial
or use the q/u switches.
Note: On this page only, the VALUE slider functions as a
modulation source - which means that you cannot use it
to select combinations.
• If the “0–1a: Combination Select” parameter is selected,
the BANK SELECT I-A–U-G switches will switch
combination banks.
• From the Bank/Combination Select menu you can view
and select combinations by bank.
• From the Category/Combination Select menu you can
view and select combinations by category.
• You can use a foot switch to select combinations. For
more information, please see the Global parameter “Foot
Switch Assign” on page 371. For a list of the functions
that can be assigned to the footswitch, please see “Foot
Switch Assignments” on page 599.
• You can transmit MIDI program changes from a
connected external MIDI device.
Bank/Combination Select menu:
1. Press the popup button located at the left of “Combina-
tion Select” to access the Bank/Combination Select
menu.
2. Press one of the tabs at left or right to select a bank.
3. Select a combination from the list. You can directly
press your choice within the list, or use the
qq
qq
/uu
uu
switches.
If the screen cannot display all of the available items, use the
scroll bar.
4. Press the OK button to execute, or press the Cancel but-
ton to cancel your selection.
0–1a
0–1b
0–1
Menu
Bank No. Description
INT–A…C 000…127 Preloaded combinations
INT–D…G,
USER–A…G
000…127 User combinations
Combination Select Popup
Bank
Category Popup
Tempo
Combination Select
To Next Page
Loading...
Need help?
General
