SEQ P0–2: Play/REC Control 0–2–8: Control Surface
207
0–2–2c: RealTime Controls
1, 2, 3, 4, 5, 6, 7, 8:
KARMA Switch
KARMA Switch Stored value
KARMA Switch Name
KARMA Slider
KARMA Slider Stored value
KARMA Slider Name
For more information, please see “0–6c: RealTime Controls”
on page 7.
▼0–2–2: Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Rename Song ☞p.271
• 4: Delete Song ☞p.271
• 5: Copy From Song ☞p.271
• 6: Load Template Song ☞p.271
• 7: Save Template Song (Save as User Template
Song) ☞p.272
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: GM Initialize ☞p.273
• 11: Copy From Combi (Copy from
Combination) ☞p.273
• 12: Copy from Program ☞p.273
• 13: Copy X–Y Motion ☞p.107
• 14: Copy KARMA Module ☞p.188
• 15: Initialize KARMA Module ☞p.189
• 16: Copy Scene ☞p.115
• 17: Swap Scene ☞p.115
• 18: Capture Random Seed ☞p.116
• 19: Auto Assign RTC Name ☞p.117
For more information, please see “Sequencer: Menu
Command” on page 271.
0–2–8: Control Surface
The Control Surface is the set of 8 sliders, and 8 switches to
the left of the display. It can do other things as well,
including editing sounds, controlling KARMA, and sending
MIDI messages to external devices.
This page shows you the current values for each of the
sliders, and switches, along with information about what
they are controlling. For instance, you can:
• Control the MIDI track 1–16 volume, Play/Mute status,
and Solo On/Off status.
• Modulate sounds and effects using the sliders and
switches
• Control KARMA, and select KARMA scenes, using the
sliders and switches
• Edit sounds using Tone Adjust
• Assign sliders, and switches to different Tone Adjust
parameters
CONTROL ASSIGN switches and parameters
You can use Control Assign in the display or the CONTROL
ASSIGN switches of the front panel to switch the function of
control surface. Since the display and the front panel
switches are linked, changing one will change the other
correspondingly.
Control Assign switches
In Sequencer mode, you can select one of five different
functions:
MIXER (Mixer T1–8, T9–16): This lets you use the control
surface to adjust the volume of tracks 1–16, and switch the
Play/Mute and Solo On/Off status. (In Combination mode
and Sequencer mode, you can use this switch to alternate
between timbres or tracks 1–8 and 9–16.)
MIXER (Mixer Input): The control surface will control the
audio input volume, Play/Mute and Solo On/Off status of
the analog inputs, S/P DIF inputs, and FireWire inputs (if
the EXB-FW is installed).
REALTIME CONTROL (RT Control): Use the sliders to
control the sound or effects. Use the switches to turn effects
on/off.
EXTERNAL lets you send MIDI messages to external MIDI
devices. Use the Global P1: MIDI– External Mode 1/2 page
to specify the MIDI message that will be transmitted.
TONE ADJUST lets you edit Programs within the context
of the Song, and without making any changes to the original
Program data. You also get hands-on access to these edits,
using the sliders, and switches.
KARMA: Use the sliders and switches to control the
KARMA function.
You can freely change back and forth between the different
functions, without losing any of your edits.
To Next Page
Loading...
Need help?
General
