COMBI P7–4: KARMA 4 7–4–1: Perf RTP (Perf Real-Time Parameters)
173
COMBI P7–4: KARMA 4
7–4–1: Perf RTP
(Perf Real-Time Parameters)
Here you can assign controllers to KARMA Performance
Real-Time Parameters (Perf. RTP) outside of the GE Real-
Time Parameters that control the internal settings of the GE.
By assigning these to KARMA Sliders 1–8 and KARMA
Switches 1–8 etc., you can control them in real-time while
you play.
Parameters selected in Group and Param (Global 7–4–
1b) and for which A/B/C/D is turned on cannot be
edited in pages such as the KARMA key zone
parameter or KARMA module parameter pages.
7–4–1a: Combination Name, Tempo
For more information, please see “2–1(2)a: Combination
Name, Tempo” on page 147.
7–4–1b: Perf Real-Time Parameters
Select (Perf RTP Select) [1–2, 3–4, 5–6, 7–8]
This selects the performance realtime parameters you’ll edit.
Group [Off, PE, Mix, Control, Trigger, Key Zones,
Random Seeds]
Param (Parameter)
[---, Time Signature…Retrigger Each Time]
Min (Min Value) [–8192…8191]
Max (Max Value) [–8192…8191]
Value [–8192…8191]
For more information, please see “7–2–2b: Perf RTP 1–2, 3–4,
5–6, 7–8 (Perf Real-Time Parameters)” on page 91.
A/B/C/D [Off, On]
Specifies whether the Perf Real-Time Parameter settings will
be valid for each Module.
On (checked): The Perf Real-Time Parameter settings will be
valid.
Off (unchecked): The Perf Real-Time Parameter settings
will be ignored.
Assign [---, SL1…8, SL1s…8s, SW1…8, Dyn1…8]
Polarity [+, –]
For more information, please see “POL. (GE Real-Time
Parameter Polarity)” on page 91.
Group: PE (Performance)
For more information, please see “Group: PE
(Performance)” on page 92.
Group: Mix
For more information, please see “Group: Mix” on page 92.
In Combination and Sequencer modes, you will also be able
to specify Run in addition to the settings of Program mode.
Run [+0000, +0001]
Assign the function of Run (Combi 0–5b).
+0000: Off
+0001: Run
For more information, please see “Run” on page 125.
Group: Control
For more information, please see “Group: Control” on
page 92.
Group: Trigger
For more information, please see “Group: Trigger” on
page 93.
Trigger By Module [+0000...+0004]
Assign the function of Trigger By Module (Combi 7–2–5a).
+0000: Off
+0001: A
+0002: B
+0003: C
+0004: D
For more information, please see “Trigger By Module” on
page 170.
GE Phrase Length [+0000…+0100]
Assign the function of GE Phrase Length (Combi 7–2–5a).
For more information, please see “GE Phrase Length” on
page 170.
Group: Key Zones
For more information, please see “Group: Key Zones” on
page 93.
Group: Random Seeds
For more information, please see “Group: Random Seeds”
on page 94.
▼7–4–1: Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy KARMA Module ☞p.114
• 4: Initialize KARMA Module ☞p.115
• 5: Copy Scene ☞p.115
• 6: Swap Scene ☞p.115
• 7: Capture Random Seed ☞p.116
• 8: Copy from Program ☞p.185
For more information, please see “Combination: Menu
Command” on page 185.
7–4
–1a
7–4
–1
Menu
7–4
–1b
To Next Page
Loading...
Need help?
General
