SEQ P0–2: Play/REC Control Mixer Input
209
Tip: On most pages, you can also toggle Exclusive Solo on/
off by holding down the ENTER switch and pressing
numeric key 2.
Track Volume:
MIX VOLUMES sliders 1 (9)...8 (16)
These sliders adjust the volume level of tracks.
Track Volume [000…127]
This controls the volume of each track.
Mixer Input
Mixer Input lets you adjust the volume and switch the Play/
Mute and Solo On/Off status of the four audio inputs
Analog Input 1, 2 and S/P DIF IN L, R
For example on stage, you could use this page screen as a
submixer to control the output of other sound modules for
output together with the M3’s own sounds.
FireWire L and R can be used if the EXB-FW option is
installed.
Other Audio Input settings
Each audio input can be assigned to up to three busses:
• An Output/IFX Bus
• An FX Control Bus
• An AUX Bus
You can set up these bus assignments on the Seq P0: Play/
REC– Sampling/Audio In page. For more information,
please see “0–7: Sampling/Audio In” on page 8.
0–2–8d: Mixer Input
Use/Edit Global Setup [Off, On]
Programs can use the single, Global audio input mixer
setup, or can instead have their own custom settings.
On (checked): The Global P0: Basic Setup– Audio page
settings for Analog Input 1, 2, S/P DIF L, R, FireWire L and
R (if the EXB-FW is installed) will be used.
If you switch from a song (or program or combination) for
which Use/Edit Global Setup is on to another song (or
program or combination), the same Audio Input settings
will be used.
Also, any edits made on this page will affect the Global
setting, along with any other Programs, Combinations, or
Songs which use the Global setting.
Off (unchecked): Turn Use/Edit Global Setup Off if you
want to use the Analog Input 1, 2, S/P DIF L, R, FireWire L
and R (if the EXB-FW is installed) settings made
individually for each song (or program or combination).
Use this setting if you want to preserve specific mixer
settings for each song, if you want to use unusual submixer
settings, or if you want to apply effect processing to specific
input signals.
On the other hand, it may sometimes be convenient to save
a particular mixer setup with an individual Song, to set up
special sub-mixer settings or effects processing for particular
inputs.
0–2
–8b
0–2
–8a
0–2
–8d
0–2
–8
Menu
To Next Page
Loading...
Need help?
General
