Program mode
96
7–2–4: Names
Here you can specify names for KARMA Sliders 1–8 and
KARMA Switches 1–8.
7–2–4a: KARMA RTC Name
Select Real-Time Controls [Slider, Switch]
Here you can choose whether you want to specify the names
for sliders or for switches.
Slider: The names of KARMA Sliders 1–8 will be displayed.
Switch: The names of KARMA Switches 1–8 will be
displayed.
7–2–4b: Names
Slider:
Slider1…Slider8
[000 (no name)...571: Waveform Select [16]]
Select the names for KARMA Sliders 1–8.
On the M3, suitable names for the various functions are
provided as presets. The long name is shown at the left, and
the short name at the right.
You can also change or newly specify the slider assignments
and names.
Switch:
SW1…SW8
[000 (no name)...571: Waveform Select [16]]
Select the names for KARMA Switches 1–8. The long name
is shown at the left, and the short name at the right.
On the M3, suitable names for the various functions are
provided as presets.
You can also change or newly specify the switch
assignments and names.
Note: The short names are shown on the switches or sliders
in the P0: Play– KARMA RTC page and the P0: Play–
Control Surface page for KARMA.
▼7–2–4: Menu Command
• 0: Write Program ☞p.106
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy KARMA Module ☞p.114
• 4: Initialize KARMA Module ☞p.115
• 5: Copy Scene ☞p.115
• 6: Swap Scene ☞p.115
• 7: Capture Random Seed ☞p.116
• 8: Auto Assign RTC Name ☞p.117
For more information, please see “Program: Menu
Command” on page 106.
7–2
–4a
7–2
–4b
7–2
–4
Menu
To Next Page
Loading...
Need help?
General
