Korg M3 - COMBI P5-2: MIDI Filter 2; 5-2-1: -5 T01-08, 5-2-2: -5 T09-16; 5-2-3: -6 T01-08, 5-2-4: -6 T09-16

To Next Page

To Previous Page

Combination mode

160

COMBI P5–2: MIDI Filter 2

5–2–1: –5 T01–08,

5–2–2: –5 T09–16

5–2–1(2)a: Combination Name, Tempo

5–2–1(2)b: Timbre Info

For more information, please see “2–1: EQ Trim T01–08, 2–2:

EQ Trim T09–16” on page 147.

5–2–1(2)c: MIDI Filter5

Timbre 01 (Timbre Number):

Enable SW1 [Off, On]

Enable SW2 [Off, On]

Speciﬁes whether or not the effect of the SW1 and SW2

switches will be transmitted and received.

SW1 and SW2 are controlled by the KYBD-61/73/88’s SW1

and SW2 switches.

The function of these switches is speciﬁed in the P1: DT/

XY/Ctrls– Controllers Setup page.

These settings are valid if these keys are assigned to SW1

Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW

(CC#65).

Enable Foot Switch [Off, On]

Speciﬁes whether or not the effect of the ASSIGNABLE

SWITCH will be transmitted and received. The function is

assigned in Global P2: Controllers– Foot Controllers page.

This ﬁlter setting is valid when a MIDI control change is

assigned.

Enable Foot Pedal [Off, On]

Speciﬁes whether or not the effect of the ASSIGNABLE

PEDAL will be transmitted and received. The function is

assigned in Global P2: Controllers– Foot Controllers page.

This ﬁlter setting is valid when a MIDI control change is

assigned.

Timbre 02...08, 09...16 (Timbre Number):

These are the MIDI Filter5 settings for timbres 2–8 and 9–16.

They are the same as for timbre 1. For more information,

please see “Timbre 01 (Timbre Number):,” above.

▼5–2–1(2): Menu Command

• 0: Write Combination ☞p.185

• 1: Panel–SW Solo Mode On ☞p.185

• 2: Exclusive Solo ☞p.185

• 3: Copy from Program ☞p.185

For more information, please see “Combination: Menu

Command” on page 185.

5–2–3: –6 T01–08,

5–2–4: –6 T09–16

5–2–3(4)a: Combination Name, Tempo

5–2–3(4)b: Timbre Info

For more information, please see “2–1: EQ Trim T01–08, 2–2:

EQ Trim T09–16” on page 147.

5–2–3(4)c: MIDI Filter6

Timbre 01 (Timbre Number):

Enable Other Control Change Messages [Off, On]

Speciﬁes whether or not MIDI control messages not covered

in the preceding items MIDI Filter will be transmitted and

received.

Enable KARMA Waveform SysEx [Off, On]

This allows you to enable or disable the System Exclusive

messages used by KARMA Wave Sequencing.

Timbre 02...08, 09...16 (Timbre Number):

These are the MIDI Filter6 settings for timbres 2–8 and 9–16.

They are the same as for timbre 1. For more information,

please see “Timbre 01 (Timbre Number):,” above.

▼5–2–3(4): Menu Command