Korg M3 - 5-2-3: -6 T01-08, 5-2-4: -6 T09-16

Sequencer mode
240
5–2–3: –6 T01–08,
5–2–4: –6 T09–16
5–2–3(4)a: Track Select, Tempo, RPPR
5–2–3(4)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 224.
5–2–3(4)c: MIDI Filter3
Track 01 (Track Number):
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not covered
in the preceding items MIDI Filter will be received.
Enable KARMA Waveform SysEx [Off, On]
This allows you to enable or disable the System Exclusive
messages used by KARMA Wave Sequencing.
Track 02...08, 09...16 (Track Number):
These are the MIDI Filter 6 settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see “Track 01 (Track Number):,” above.
▼5–2–3(4): Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Rename Song ☞p.271
• 4: Delete Song ☞p.271
• 5: Copy From Song ☞p.271
• 6: Load Template Song ☞p.271
• 7: Save Template Song (Save as User Template
Song) ☞p.272
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: GM Initialize ☞p.273
• 11: Copy From Combi (Copy from
Combination) ☞p.273
• 12: Copy from Program ☞p.273
For more information, please see “Sequencer: Menu
Command” on page 271.
5–2
–3c
5–2
–3b
5–2
–3a
5–2
–3
Menu