Envelope Group Level Combinations
563
Level Combinations
Sta/Att Level (Start/Attack Level) [0…99]
Controls an Envelope’s Start and Attack Levels at the same
time - both will be set to the same value.
Sta/Sus Level (Start/Sustain Level) [0…99]
Controls an Envelope’s Start and Sustain Levels at the same
time - both will be set to the same value.
Sta/Rel Level (Start/Release Level) [0…99]
Controls an Envelope’s Start and Release Levels at the same
time - both will be set to the same value.
Att/Sus Level (Attack/Sustain Level) [0…99]
Controls an Envelope’s Attack and Sustain Levels at the
same time - both will be set to the same value.
Att/Rel Level (Attack/Release Level) [0…99]
Controls an Envelope’s Attack and Release Levels at the
same time - both will be set to the same value.
Sus/Rel Level (Sustain/Release Level) [0…99]
Controls an Envelope’s Sustain and Release Levels at the
same time - both will be set to the same value.
Sta/Att/Sus Level (Start/Attack/Sustain Level)
[0…99]
Controls an Envelope’s Start, Attack and Sustain Levels at
the same time - all will be set to the same value.
Sta/Att/Rel Level (Start/Attack/Release Level)
[0…99]
Controls an Envelope’s Start, Attack and Release Levels at
the same time - all will be set to the same value.
Sta/Sus/Rel Level (Start/Sustain/Release Level)
[0…99]
Controls an Envelope’s Start, Sustain and Release Levels at
the same time - all will be set to the same value.
Att/Sus/Rel Level (Attack/Sustain/Release Level)
[0…99]
Controls an Envelope’s Attack, Sustain and Release Levels
at the same time - all will be set to the same value.
All Levels [0…99]
Controls an Envelope’s Start, Attack, Sustain and Release
Levels at the same time - all will be set to the same value.
Time Combinations
Att/Dec Time (Attack/Decay Time) [0…99]
Controls an Envelope’s Attack and Decay Times at the same
time - both will be set to the same value.
Att/Rel Time (Attack/Release Time) [0…99]
Controls an Envelope’s Attack and Release Times at the
same time - both will be set to the same value.
Dec/Rel Time (Decay/Release Time) [0…99]
Controls an Envelope’s Decay and Release Times at the
same time - both will be set to the same value.
All Times [0…99]
Controls an Envelope’s Attack, Decay and Release Times at
the same time - all will be set to the same value.