Korg M3 - 5-1-7: -4 T01-08, 5-1-8: -4 T09-16

COMBI P5–1: MIDI Filter 1 5–1–7: –4 T01–08, 5–1–8: –4 T09–16
159
5–1–7: –4 T01–08,
5–1–8: –4 T09–16
Here you can specify whether the effects of sliders 5–8 will
be transmitted when the CONTROL ASSIGN REALTIME
CONTROL switch is selected. The functions of sliders 5–8
can be specified in the P1: DT/XY/Ctrls– Controllers Setup
page.
5–1–7(8)a: Combination Name, Tempo
5–1–7(8)b: Timbre Info
For more information, please see “2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16” on page 147.
5–1–7(8)c: MIDI Filter4
Timbre 01 (Timbre Number):
Enable Realtime Control Slider-5 [Off, On]
Enable Realtime Control Slider-6 [Off, On]
Enable Realtime Control Slider-7 [Off, On]
Enable Realtime Control Slider-8 [Off, On]
These specify whether MIDI message will be transmitted
and received for Sliders 5 through 8.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter4 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see “Timbre 01 (Timbre Number):,” above.
▼5–1–7(8): Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy from Program ☞p.185
For more information, please see “Combination: Menu
Command” on page 185.
5–1
–1a
5–1
–1
Menu
5–1
–1b
5–1
–1c