Korg M3

Combination mode
146
Pads and MIDI Channel
Notes 1–8 [Off, C–1…G9 / 001…127]
These parameters let you edit the 8 notes assigned to each
pad, along with a separate velocity for each note. To play
fewer than 8 notes, just set the unwanted notes to Off.
Off: Select this to disable the note.
C–1…G9: This sets the note number.
001…127: This sets the note’s velocity value.
For more detailed instructions, please see “1–7(8)a: Pads
Chord” on page 36.
Pad 2...4, 5...8
These are the same as for Pad 1, as described above.
▼1–7(8): Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy from Program ☞p.185
• 4: Copy Pad Setup ☞p.112
For more information, please see “Combination: Menu
Command” on page 185.
T01: Piano
T02: Strings
Gch
Gch
Gch
2ch
T03: Bell 2ch
T01: Piano
T02: Strings
Gch
2ch
Gch
3ch
T03: Bell 3ch
KARMA Module A
In: Gch/Out:Gch
KARMA Module B
In: Gch/Out:2ch
KARMA Module C
In: 3ch/Out:3ch
Pad1
Pad2
Pad1
Pad2
Gch
Gch