SEQ P7–1: KARMA 1 7–1–1: GE Setup A
245
recorded on tracks with matching channels. (See the
diagram below, “KARMA-MIDI Input/Output Channel.”)
Tc h : Automatically match the MIDI channel (Seq 3–1(2)c) of
the track selected by Track Select (Seq 0–1–1(2)c).
Example 1
With the following settings, switching Track Select (the
track you play) to change programs will also switch to a
different KARMA Module at the same time, causing a
different phrase to play. (See the diagram “Example 1,”
below.)
1. Set MIDI Track 1 as follows.
Program Select: a Guitar category program
MIDI Channel: 01
2. Set MIDI Track 2 as follows.
Program Select: a Bass category program
MIDI Channel: 02
3. Set KARMA Module [A] as follows.
GE Select: a riff of GE category Guitar
Input Channel: 01
Output Channel: 01
4. Set KARMA Module [B] as follows.
GE Select: a riff of GE category Bass
Input Channel: 02
Output Channel: 02
5. In Track Select, select T01: Track 01, and play the key-
board. (KARMA function on)
The Guitar riff of KARMA Module [A] will be sounded by
the Guitar type program.
6. In Track Select, select T02: Track 02, and play the key-
board. (KARMA function on)
The Bass riff of KARMA Module [B] will be sounded by the
Bass type program.
Example 2
With the following settings, switching Track Select (the
track you play) to change programs will not switch to a
different KARMA Module – the same phrase will still be
played. (See the diagram “Example 2,” below.)
1. Set MIDI Track 1 as follows.
Program Select: a Guitar category program
MIDI Channel: 01
2. Set MIDI Track 2 as follows.
Program Select: a Bass category program
MIDI Channel: 02
3. Set KARMA Module [A] as follows.
GE Select: a riff of GE category Guitar
Input Channel: Tch
Output Channel: Tch
4. In Track Select, select T01: Track 01, and play the key-
board.
The Guitar riff of KARMA Module [A] will be sounded by
the Guitar type program.
5. In Track Select, select T02: Track 02, and play the key-
board.
The Guitar riff of KARMA Module [A] will be sounded by
the Bass type program.
Example 3
With the following settings, switching Track Select (the
track you play) to change programs will also switch to a
different KARMA Module at the same time, causing a
different phrase to play. At this time, the rhythm track can be
triggered and controlled from either track. (See the diagram
“Example 3,” below)
1. Set MIDI Track 1 as follows.
Program Select: a Guitar category program
MIDI Channel: 01
2. Set MIDI Track 2 as follows.
Program Select: a Bass category program
MIDI Channel: 02
3. Set MIDI Track 3 as follows.
Program Select: a drum program (a Drums category
program)
MIDI Channel: 03
4. Set KARMA Module [A] as follows.
KARMA Module [A]
In : 01ch
Out : 01ch
KARMA Module [B]
In : 02ch
Out : 02ch
KARMA ON/OFF = ON
Track 01: GuitarIn : 01ch
Track 02: Bass
In : 02ch
Track Select = Track 01
Track Select = Track 02
01ch
02ch
Guitar Riff
Bass Riff
KARMA Module [A]
In : Tch
Out : Tch
KARMA ON/OFF = ON
Track 01: GuitarIn : 01ch
Track 02: Bass
In : 02ch
Track Select = Track 01
Track Select = Track 02
01ch
02ch
Guitar Riff
Guitar Riff
KARMA Module [A]
In : 01ch
Out : 01ch
KARMA Module [B]
In : 02ch
Out : 02ch
KARMA ON/OFF = ON
Track 01: GuitarIn : 01ch
Track 02: Bass
In : 02ch
Track Select = Track 01
Track Select = Track 02
01ch
02ch
Guitar Riff
Bass Riff
Track 03: Drums
In : 03ch
KARMA Module [C]
In : Tch
Out : 03ch
Drums
Pattern
01ch
02ch
Example 1
Example 2
Example 3
To Next Page
Loading...
Need help?
General
