Sequencer mode
278
Even if you press the SEQUENCER START/STOP switch
during playback, playback and resampling will stop, and a
WAVE file will be created.
Auditioning the WAVE file you created
• To audition the WAVE file you created, use the menu
command Select Directory.
Note: Use the menu command Select Directory to specify
the location in which the new WAVE file will be created.
Auto Sampling Setup: Automatically-set parameters and their values
- : Not set automatically
Values enclosed in parentheses [ ] are automatically set
according to the settings you make in the dialog box.
*1: [ ] User Global Setting: Edit Program Parameters
[x] User Global Setting: Edit Global Parameters
*2: Set to the input source specified by Source Audio.
*3: Set to Mono-L, R-Mono, or Stereo to match the Source
Audio setting.
*4: If Save to is RAM.
*5: If Save to is RAM and Convert to Program is On.
Note: For In-Track Sampling, the Starts parameter will be set
to BTH for the MIDI track specified by the To setting.
Copy Tone Adjust
For more information, please see “Copy Tone Adjust” on
page 111.
Copy Drum Track
This command copies the drum track settings of the
specified Program, Combination, or Song.
For more information, please see “Copy Drum Track” on
page 112.
Erase Drum Track Pattern
This erases the drum track pattern you specify.
For more information, please see “Erase Drum Track
Pattern” on page 112.
Reset Tone Adjust
For more information, please see “Reset Tone Adjust” on
page 111.
Copy Pad Setup
For more information, please see “Copy Pad Setup” on
page 112.
Detune BPM Adjust
When the program selected for a track uses a phrase,
rhythm loop multisample (or sample that was created to
match a specific BPM in Sampling mode in Media mode)
[Initialize] [Resample SEQ Play] [In-Track Sampling] [2ch Mix to Media]
Input (Input Source)*1
Analog Analog [Source Audio]*2 Analog
S/P DIF S/P DIF S/P DIF
FireWire FireWire FireWire
Input1
Bus Select Off Off Off Off
FX Ctrl Bus Off Off Off Off
Aux Bus Off Off 1/2 Off
Send1/2 000 000 000 000
Pan L000 L000 L000 L000
Level 127 127 127 127
Input2
Bus Select Off Off Off Off
FX Ctrl Bus Off Off Off Off
Aux Bus Off Off 1/2 Off
Send1/2 000 000 000 000
Pan R127 R127 R127 R127
Level 127 127 127 127
Sampling Setup
Source Bus L/R L/R AUX1/2 L/R
Trigger Note On Note On Sampling START SW Sequencer START SW
Metronome Precount (N/A) (N/A) - (N/A)
Save to RAM [Save to] [Save to] MEDIA
Mode Stereo Stereo [Source Audio]*3 Stereo
Sample Time(RAM) Maximum - - (N/A)
Sample Time(MEDIA) 4 min 59.999 sec - - -
Rec Level +0.0 +0.0 +0.0 +0.0
Select Sample
Auto +12dB On On On*4 On*4 -
Convert to Program Off [Convert to Program]*5 [Convert to Program]*5 -
Program - [Program]*5 [Program]*5 -
MS - (Create new)*5 (Create new)*5 -
Original Key - (C2)*5 (C2)*5 -
Seq. Event - - On*5 -
MIDI Track - - [To]*5 -
Select Directly - - - - -
Insert FX Bus Select (Post IFX) - - - -
To Next Page
Loading...
Need help?
General
