Korg M3

Global mode
372
Slider 1 [Off, 000...119]
Slider 2 [Off, 000...119]
Slider 3 [Off, 000...119]
Slider 4 [Off, 000...119]
Slider 5 [Off, 000...119]
Slider 6 [Off, 000...119]
Slider 7 [Off, 000...119]
Slider 8 [Off, 000...119]
These assign control change messages to each of the
KARMA sliders 1–8.
2–2b: X–Y
X (X–Y Mode) [Off, 000...119]
Y (X–Y Mode) [Off, 000...119]
These assign control change messages to the X-axis and Y-
axis of the X–Y control. For more information, please see “X–
Y MIDI Out” on page 366.
2–2c: Pads (CC and Note)
Pad 1 [Off, C–1...G9, CC#000...CC#119]
Pad 2 [Off, C–1...G9, CC#000...CC#119]
Pad 3 [Off, C–1...G9, CC#000...CC#119]
Pad 4 [Off, C–1...G9, CC#000...CC#119]
Pad 5 [Off, C–1...G9, CC#000...CC#119]
Pad 6 [Off, C–1...G9, CC#000...CC#119]
Pad 7 [Off, C–1...G9, CC#000...CC#119]
Pad 8 [Off, C–1...G9, CC#000...CC#119]
These assign note numbers or control change messages to
pads 1–8. For more information, please see “Pads MIDI
Out” on page 366.
▼2–2: Menu Command
• 0: Write Global Setting ☞p.382
• 1: Reset Controller MIDI Assign ☞p.387
For more information, please see “Global: Menu Command”
on page 382.