236
Error messages & Troubleshooting
Error messages
Jukebox list is empty
YoutriedtodeleteaSonginanemptyJukeboxlist,or
tosaveanemptyJukeboxlist.
Jukebox list is full
TheJukeboxlistalreadycontains127Songs.
Not a Standard Midi File
TheselectedfileisnotaStandardMIDIFile,andcan‐
not be played back. Select a “.MID” or “.KAR
” file.
microARRANGERcanplay back Standard MIDI Files
in0‐and1‐format.
Standard Midi File format 2
YouhavetriedtoreadaFormat2StandardMIDIFile.
microARRANGER can’t play this kind of file. Select a
StandardMIDIFilesin0‐and1‐format.
Program
Overwrite Program? (Enter/Exit)
YouaretryingtostoreaProgramtoamemorylocation
alreadyoccupiedbyaProgram.PressENTERtoover‐
writeit,orEXITtoabort.
Card mode
Can’t Read Card! (Press Exit)
The card is probably damaged. Try again. If the mes‐
sageappearsagain,trywithadifferentcard.
Can't Read File! (Press Exit)
Thefileyouaretrying toload,copy,eraseorrenameis
damaged,orhas a null size (0 kb), thus can’t be read.
ThismessageduringaNewDiroperationmeansthere
are problems on the card. Try loading the file from a
differentcard.
Copy Failed! (Press Exit)
An error occurred during Copy. Copy operation
aborted.
Copy: Invalid Destination (Press Exit)
You tried to copy an ordinary file or folder into a
“.SET”folder.
Corrupted Style Perf. Save it again
The Style Performance is damaged. Save it again by
pressing WRITE, and selecting the “Current Style”
option.
Delete all data. Continue? (Enter/Exit)
Formatting will delete all data on the card you are
readytoformat.Besureyouhaveacopyofalldatayou
wishtopreserve.
Delete Destin. Files Failed! (Press Exit)
The file you were trying to overwrite could not be
deleted.
Destination File Exists (Press Exit)
Thefileyouaretryingtocopyalreadyexistsontarget.
Directory Full (Press Exit)
Youreachedthe maximumfoldernumberfortheroot
of the selected card. Delete some files, or replace the
card.
Directory Not Empty (Press Exit)
You were trying to delete a directory still containing
files.Deletethesefiles,thendeletethedirectory.
Directory not found (Press Exit)
The directory is not in the current card. The card has
probablybeenreplacedbeforefinishingthecardopera‐
tion.Insertthecardagain,andtryagain.
Card Full (Press Exit)
Theselectedmedium(card)isfull.Deletefilesyouare
not interested to keep, or replace the card with an
emptyone.Then,tryagain.
Card not empty! (Sh+Enter to Format)
DuringaBackup,youinsertedacardcontainingsome
data. Please replace it with an empty one, or press
SHIFT+ENTERtostartformattingthecard.
Card write-protected
Thecardiswrite‐protected.Movethe protectiontabto
closethehole,and try again. Besuretherearen’t data
you don’t want to overwrite. Otherwise, replace the
cardwithanemptyone.
Erase Failed! (Press Exit)
An error occurred during Erase. Erase operation
aborted.
Error while converting (Press Exit)
While trying to load Korg i‐series data, some errors
occurred.Theoriginalfileisprobablycorrupted,orits
structureistoodifferentfrommicroARRANGERorPa‐
seriesdata.
Error while formatting medium
An error was reported when formatting the medium
(card). The format procedure has been aborted. Try
again. If formatting a card, replace the card and try
again.
Error while Writing! (Press Exit)
An error was reported while writing on the medium
(card).Theprocedurehasbeencanceled.Selectadiffer‐
entmedium,andtryagain.
Existing Files Not Copied (Press Exit)
After a Copy procedure (no Overwrite selected), all
filessharingthesamenamehavenotbeencopied.
Factory Styles Protected! (Press Exit)
The“.SET”fileyoujustloadedincludedsomebanksof
FactoryStyles.SincetheFactoryStyleProtectflagwas
switchedon,FactoryStylebankswerenotloaded.(See
“FactorySt
yleProtect”onpage142).
Fast Format Failed. Full Format? (Enter/Exit)
The Fast Format procedure failed. Press ENTER to go
onwithaFullFormatprocedure(slower).
File is protected
Youhavetriedtowriteoveraread‐onlyorsystemfile.
microARRANGER can’t write over this kind of files.
Should youneedto write overoneofthesefile, use a
personalcomputertochangethefile’sproperties,then
tryagain.Readyourcomputer’suser’smanual.
File/Dir Already Existing (Press Exit)
DuringaRenameorNewDiroperation,youweretry‐
ingtouseanexistingname.Useadifferentname.
File in Use (Press Exit)
Thefileyoutriedtodeleteisin usebyanotherproce‐
dure.Waitfortheproceduretobecompleted,thentry
again.
To Next Page
Loading...
Need help?
General
