237
Error messages & Troubleshooting
Error messages
Files in Use Not Deleted (Press Exit)
This message may appear during an Erase operation.
Filesusedbyotherprocedureshavenotbeenerased.
Files in use have not been overwritten
This message may appear during a Copy with Over ‐
write operation. Files used by other procedures have
notbeencopied.
File Is Protected (Press Exit)
Youweretryingtooverwriteaprotectedfile.
File Not Found (Press Exit)
The file is not in the current medium. The card has
probablybeenreplacedbeforefinishingthecardopera‐
tion.Insertthecardagain,andtryagain.
Format Completed (Press Exit)
Formattinghasbeensuccessfullycompleted.
Format aborted (Press Exit)
Formatoperationaborted.
Format failed! (Press Exit)
An error occurred during Format. Format operation
aborted.
Illegal name (Press Exit)
ThenameisnotallowedonmicroARRANGER.
Insert an SD card and press Enter
While saving the operating system “Save OS” on
page141, or executing a Backup procedure (see
“Backup Data” on page141), microARRANGER asks
fora
card.
Invalid Copy Parameter (Press Exit)
Thecopyoperationwasnotpossible.Maybeyouwere
tryingtocopyafileoveritself,orcopyingnestedfold‐
ers.
Load Failed! (Press Exit)
TheLoadprocedurehasnotbeenexecuted.Tryagain,
ortrywithdifferentfiles.
Make New Dir Failed! (Press Exit)
While trying to create a new directory, an error
occurred.
Media Write-Protected (Press Exit)
The card is physically protected. Remove the protec‐
tion,andtryagain.
Memory full
This message appears in Backing Sequence mode,
whenthememoryforrecordingaSongisfull.
No Card/Unformatted. (Sh+Enter to Format)
Eitherthereisnocardinthedrive,orthecardisunfor‐
matted. Insert a card, and try again, or press
SHIFT+ENTERtostartformat
tingthecard.
Not a Pa-series or Corrupted File
The file you are trying to load is not compatible with
microARRANGERorPa‐seriesinstruments.
Not Enough Space on Media
Thereisnomorespacetoload,saveorcopydata.The
card operation will be aborted. Replace the card, and
useanemptycardtosaveyourdata.Shouldthismes‐
sageap
pearduringloading,theSS
D(SolidStateDisk)‐
basedinternalmemoryisfull.
Nothing to Rename (Press Exit)
Therearenoitemstorename.
Overwrite Existing File? (Yes/No)
Youarewritingdataonanexisting“.SET”folder,oron
afileoftype“.MID”or“.JBX”.
Overwrite on Backup? (Enter/Exit)
PressENTER/YEStooverwritefilescarryingthesame
nameonthe target device,orEXIT/NOtoavoidover‐
writinganyfile.
Overwrite on Copy? (Enter/Exit)
PressENTER/YEStooverwritefilescarryingthesame
name on the target device (Press Exit)/NO to avoid
overwriting any file. File that are not yet on card are
alwayscopied.
Overwrite Protected Files? (Enter/Exit)
Protectedfilescannotusuallybeoverwritten.Bypress‐
ingENTER,youcanoverwritethemduri
ngthecurrent
operation.
Rename: Invalid Name (Press Exit)
You can’t use the name you entered. Please retry and
selectadifferentname.
Rename: New Name Must Be a \".SET\
Youcan’tmodifya“.SET”folderextension.
Rename Failed! (Press Exit)
An error occurred during Rename. Rename operation
aborted.
Save Failed! (Press Exit)
AnerroroccurredduringSave.Saveoperationaborted.
Some Files Missing (Press Exit)
ThismessagemayappearattheendofaRestoreopera‐
tion.SomeUserfilemaybemissing.Thisisnotaprob‐
lemfortheFactoryDa
taintegrit
y.
Unit Not Found (Press Exit)
Youweretryingtoaccessastoragedevicenotavailable
onyourinstrument.
Unformatted medium
Youhaveselecteda medium (card)thatis notyet for‐
matted, or is in a formatthat microARRANGER can’t
recognize.FormatthemediumusingtheForma
tproce‐
dure(see“Page5‐Format”onpage140).
Wait
microARRANGERisbusywithacardoperation.
To Next Page
Loading...
Need help?
General
