9/29/09 A-73
148 “EEPROM Fault”
149 “Out of Memory”
150 “Memory was Lost”
151 “Unimplemented”
152 “System Locked”
153 “A:D Stack Full”
154 “A:D Over-Run”
155 “Serial Port Framing”
156 “Serial Port Line Noisy”
157 “Serial Port Over-Run”
158 “Unknown I/O Command”
159 “Operand 1 Range”
160 “Operand 2 Range”
161 “I/O Overflow”
162 “Can’t Calibrate”
163 “Calibration Invalid”
164 “Analog Calibration Bad”: often an indication of a faulty EPRM
165 “ID is Active”
166 “ID is in ROM’”
167 “ID is Read Only”
168 “ID is in a File”
169 “ID has Changed”
170 “ID Space Full”
171 “Purge Required”
To Next Page
Loading...
