9/29/09 Front Panel Keys; Functions and Menus 3-35
Default is set to the value of the last
2 digits of the serial number and can
be set within the range of 1 to 100.
Serial Address - Address of instrument. This setting identi-
fies the instrument within a network of instruments by
assigning it a network or serial address.
Flow Control - Flow control of the serial connection. Flow
control can be changed to None, Hardware, Xoff, or Both.
Flow control prevents the loss of data when either the instru-
ment or controller’s input buffer becomes full. Hardware
flow control is recommended.
See the section "Modem Control
Mode (All Instruments)" on page A-
74 for more detailed information on
modem communication.
Modem Mode - Turns the modem mode on or off to allow
communication to a telephone modem.
To Next Page
Loading...
Need help?
General
