Diagnostic aids 3-41
5061
Area E
1.
Pull the duplex tray E completely out. Look inside, and remove any paper caught in the rollers. Also, look
up inside, as some jams may be above the rollers.
2. Reinstall the duplex mechanism in the printer.
Area T<x>
If you cannot clear all the 500-sheet drawer jams from Area C:
1. Carefully open trays 2 through 4 (all 500-sheet trays), and remove jams.
Note: Make sure the paper is pushed all the way down into the tray.
2. Close trays 2 through 4.
If you cannot clear the 2000-sheet drawer jam from Area C:
1. Open the 2000-sheet drawer.
2. Remove any jams, and then close the 2000-sheet drawer.
To Next Page
Loading...
