4-6 Service Manual
5061
Removal procedures
Note: Some removal procedures require removing cable ties. You must replace cable ties during reassembly to
avoid pinching wires, obstructing the paper path, or restricting mechanical movement.
CAUTION
Remove the power cord from the electrical outlet before you connect or disconnect any cable
or electronic board or assembly for personal safety and to prevent damage to the printer.
Disconnect any connections between the printer and PCs/peripherals.
CAUTION
The C77x weighs approximately 48–82 kg (105–181 lb) and requires at least three people to
lift it safely. Remove the options before lifting the printer. Make sure your fingers are not under
the printer when you lift or set the printer down.
To Next Page
Loading...
Need help?
General
