4-80 Service Manual
5061
Rear bellcrank removal (cyan, magenta, yellow)
See page 7-25 for the part numbers for the parts packet, including the rear transfer bellcranks, for yellow, cyan,
and magenta.
1. Power off the printer.
2. Remove the four toner cartridges, and leave the front door open.
3. Remove the ITU assembly. See “ITU assembly removal” on page 4-49.
4. Check each of the rear bellcranks for cracks or breakage.
5. Remove the spring (A).
To Next Page
Loading...
Need help?
General
