Diagnostic information 2-9
5061
2xx paper jams
200.03 Paper Jam
Clear Paper Path
S2 sensor was made at an unexpected time. This message indicates that a paper
jam has occurred at or near the printer Input Sensor. Open the printers left door
(Paper Jam Removal Door) to access the jammed media.
If removing the jammed media does not fix the problem, go to “200.03 paper jam
service check” on page 2-28.
200.04 Paper Jam
Clear Paper Path
S2 sensor wasn’t made within timeout period. This message indicates that a paper
jam has occurred at or near the printer input sensor. Open the printers left door
(Paper Jam Removal Door) to access the jammed media.
If removing the jammed media does not fix the problem, go to “200.04 paper jam
service check” on page 2-29.
200.05 Paper Jam
Clear Paper Path
S2 sensor did not break within timeout period. This message indicates that a paper
jam has occurred at or near the printer input sensor. Open the printers left door
(Paper Jam Removal Door) to access the jammed media.
If removing the jammed media does not fix the problem, go to “200.05 paper jam
service check” on page 2-30.
200.06 Paper Jam
Clear Paper Path
Narrow media sensor was made at an unexpected time. This message indicates that
a paper jam has occurred at or near the printer input sensor. Open the printers left
door (Paper Jam Removal Door) to access the jammed media.
If removing the jammed media does not fix the problem, go to “200.06 paper jam
service check” on page 2-30.
200.07 Paper Jam
Clear Paper Path
Narrow media sensor did not break within the timeout period. This message
indicates that a paper jam has occurred at or near the printer input sensor. Open the
printers left door (Paper Jam Removal Door) to access the jammed media.
If removing the jammed media does not fix the problem, go to “200.07 paper jam
service check” on page 2-31.
200.16 Paper Jam
Clear Paper Path
S2 sensor was made excessively early. This message indicates that a paper jam has
occurred at or near the printer input sensor. Open the printers left door (Paper Jam
Removal Door) to access the jammed media.
If removing the jammed media does not fix the problem, go to “200.16 paper jam
service check” on page 2-31.
200.21 Paper Jam
Clear Paper Path
Laser paper path sensor (transparency sensor) is obstructed. This message
indicates that a paper jam has occurred at or near the printer input sensor. Open the
printers left door (Paper Jam Removal Door) to access the jammed media.
If removing the jammed media does not fix the problem, go to “200.21, 200.28, and
200.29 paper jam service check” on page 2-32.
200.28 Paper Jam
Clear Paper Path
S2 paper path sensor obstructed. This message indicates that a paper jam has
occurred at or near the printer input sensor. Open the printers left door (Paper Jam
Removal Door) to access the jammed media.
If removing the jammed media does not fix the problem, go to “200.21, 200.28, and
200.29 paper jam service check” on page 2-32.
200.29 Paper Jam
Clear Paper Path
Narrow media sensor obstructed. This message indicates that a paper jam has
occurred at or near the printer input sensor. Open the printers left door (Paper Jam
Removal Door) to access the jammed media.
If removing the jammed media does not fix the problem, go to “200.21, 200.28, and
200.29 paper jam service check” on page 2-32.
200.69 Paper Jam
Clear Paper Path
Registration— replace the registration motor. See “Registration motor removal”
on page 4-84.
If this does not fix the problem, replace the system board. See “System board
removal” on page 4-90.
Error codes and paper jam messages (continued)
Error code Action
To Next Page
Loading...
Need help?
General
