Lexmark C78x User Manual

2-126 Service Manual
5061
User attendance messages
Note: A secondary message only displays if the finisher option is installed.
User attendance messages
User primary
message
Explanation
Activating Demo
Mode
The printer is entering Demo Mode.
Activating Menu
Changes
Wait for the message to clear.
Activating PPDS
Mode
The PPDS emulator has been activated.
Bin <x> Full • The specified bin is full.
• Remove the stack of paper from the bin to clear the message. If you assigned the
bin a name, the bin name is displayed instead of the bin number.
Busy Wait for the message to clear, or cancel the print job.
Calibrating Wait for the message to clear.
Cancel not available Wait for the message to clear.
Cancelling Wait for the message to clear.
<color> Cartridge Low Specified toner cartridge is low. <color> refers to either Cyan,
Magenta, Yellow, or Black.
Change <src>
<Custom Type
Name>
•Press
if you have changed the media.
•Select Use current to print on media currently in the printer.
• Cancel the current job.
Change <src>
<Custom String>
Change <src> <size>
Change <src> <type>
<size>
Check <device>
Connection
The specified device is either not fully connected to the printer or is experiencing a
hardware failure.
• Reestablish communication by removing the specified device and reattaching it to
the printer.
•Press
to clear the message and continue printing.
• In the case of a hardware failure, turn the printer off and back on. If the error
recurs, go to “982.xx error service check” on page 2-66.
Clearing job
accounting statistics
Wait for the message to clear.
Close door Close the upper and lower doors to clear the message.
Close <tray> door Close the 2000-sheet drawer door to clear the message.
Copies Enter the desired number of copies.
Deactivating Demo
Mode
The printer is leaving Demo Mode.
Deactivating PPDS
Mode
The PPDS emulator has been deactivated.
Defragmenting Flash
DO NOT POWER OF
F
Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Delete • Press
to delete the specified job.
•Press
to cancel the operation.

Lexmark C78x Specifications

General

Brand	Lexmark
Model	C78x
Category	Printer
Language	English