MacDon M155 2022 - Page 262

215676 242 Revision A
1029827
A
B
Figure 4.175: Safety Prop
13. Engage the safety props on both lift cylinders:
a. Shut down the engine, and remove the key from the
ignition.
b. Pull lever (A) and rotate it towards the header to
release and lower safety prop (B) onto the lift cylinder.
c. Repeat the previous steps for the opposite lift cylinder.
1000711
A
Figure 4.176: Header Support
14. Install clevis pin (A) through the support and the foot and
secure it with the hairpin.
IMPORTANT:
Ensure clevis pin (A) is fully inserted and the hairpin is
installed behind the bracket.
15. Repeat the previous step to secure the support on the
other side of the header.
OPERATION