Mitsubishi Electric MELSEC iQ-R Series - Page 1670

1668
19 CC-LINK INSTRUCTIONS
19.8 Performing a Message Transmission to a Remote Device Station
■Applicable devices
*1 Index modification is not available.
■Control data
Operand Bit Word Double word Indirect
specification
Constant Others
(U)
X, Y, M, L,
SM, F, B, SB,
FX, FY
J\ T, ST, C, D, W,
SD, SW, FD, R,
ZR, RD
U\G, J\,
U3E\(H)G
Z LT, LST,
LC
LZ K, H E $
(U)
*1
        
(s1)         
(s2)         
(d1)         
(d2)         
Operand: (s1)
Device Item Description Setting range Set by
+0 Completion status The completion status is stored upon completion of the instruction.
• 0: Completed successfully
• Other than 0: Completed with an error (error code)
 System
+1 Station number Specify the station number of the target station. 1 to 64 User
+2 Send data size Specify the send message data size in bytes. 1 to 255 User
+3 Receivable data size Specify the maximum size of the device that stores the receive message data in
bytes.
0 to 255 User
+4 Receive data size The receive message data size is stored in bytes.  System