Mitsubishi Electric MELSEC iQ-R Series - Page 1752

1750
21 A/D CONVERSION INSTRUCTIONS
21.3 Restoring the User Range Setting Values
*1 For the R60ADV8 and the R60ADI8, this area corresponds to System area and so is not available.
+45 CH3 User range setting offset value (H) System
+46 CH3 User range setting gain value (L) System
+47 CH3 User range setting gain value (H) System
+48 CH4 User range setting offset value (L) System
+49 CH4 User range setting offset value (H) System
+50 CH4 User range setting gain value (L) System
+51 CH4 User range setting gain value (H) System
+52 CH5 User range setting offset value (L) System
+53 CH5 User range setting offset value (H) System
+54 CH5 User range setting gain value (L) System
+55 CH5 User range setting gain value (H) System
+56 CH6 User range setting offset value (L) System
+57 CH6 User range setting offset value (H) System
+58 CH6 User range setting gain value (L) System
+59 CH6 User range setting gain value (H) System
+60 CH7 User range setting offset value (L) System
+61 CH7 User range setting offset value (H) System
+62 CH7 User range setting gain value (L) System
+63 CH7 User range setting gain value (H) System
+64 CH8 User range setting offset value (L) System
+65 CH8 User range setting offset value (H) System
+66 CH8 User range setting gain value (L) System
+67 CH8 User range setting gain value (H) System
Operand: (s)
Device Item Description Setting range Set by