19 - 16
19. MULTI-CHANNEL FUNCTION
19.3 GOT Side Settings
For the connection via the connection type selected in 19.3.3, select interfaces and communication units to be used.
Select the interfaces and communication units according to the connection type by referring to the following.
Selected connection type Reference for required interface and communication unit
• Bus connection
This section ■ GOT interface used for bus connection
• MELSECNET/H connection (PLC to PLC network)
This section ■ GOT interface used for network connection
• MELSECNET/10 connection (PLC to PLC network)
• CC-Link IE Controller Network connection
• CC-Link IE Field Network connection
• CC-Link connection (intelligent device station)
• CNC connection
(MELSECNET/10 connection (PLC to PLC network), CC-Link
connection (intelligent device station))
• Ethernet connection
This section ■ GOT interface used for Ethernet connection
• Third party PLC connection (Ethernet connection)
• Robot controller connection
• CNC connection (Ethernet connection)
• Microcomputer connection (Ethernet)
•MODBUS
®
/TCP connection
• Direct CPU connection
This section ■ GOT interface used for serial connection
• Computer link connection
• CC-Link connection (via G4)
• Inverter connection
• Servo amplifier connection
• CNC connection (serial connection)
• GOT Multi- Drop Connection
• Third party PLC connection (serial connection)
• Third party safety controller connection
• Third party servo amplifier connection
• Third party robot controller connection
• Third party temperature controller connection
• Microcomputer Connection (Serial)
•MODBUS
®
/RTU connection
• Other functions
This section ■ Interfaces and option units used for other functions
To Next Page
Loading...
Need help?
General
