Mitsubishi GOT2000 Series Connection Manual

19. MULTI-CHANNEL FUNCTION
19.3 GOT Side Settings
19 - 21
19
MULTI-CHANNEL FUNCTION
2. After writing down the names of communication units, write down CH
No. to be assigned to respective units based on the entry in ■ Check
Sheet No. 1 (selection of connection type and interface).
3. After writing down CH No., write down the communication driver name
for each connection type. For the communication drivers used for the
respective connection types, refer to the following.
Chapters of each respective connection type
(2)
Extension interface
1st stage
2nd stage
3rd stage
Com. unit name CH No. Driver name
Com. unit name CH No.
Com. unit name
Com. unit name
CH No.
CH No.
Standard interface 2
Connection a controller
Driver name
Connecting a barcode reader, RFID controller,
or personal computer
Driver name
Driver name
(only one connection)
(1)
(3)
(8)
Standard interface 4
Connection a controller (Without multi-channel Ethernet connection)
Driver name
Connection a controller (With multi-channel Ethernet connection)
(only one connection)
(9)
Standard interface 1
Connection a controller
Driver name
(only one connection)
(7)
Driver name
Multi-channel Ethernet connection Multi
Driver name
Com. unit name CH No.
Com. unit name CH No.
Com. unit name CH No.
Com. unit name CH No.
(1)
(2)
(3)
(9)
(8)
(7)
3rd stage
2nd stage
1st stage
(Example: For GT27)
5
4
1
3
8
2
(2)
Extension interface
1st stage
2nd stage
3rd stage
Com. unit name CH No. Driver name
Com. unit name CH No.
Com. unit name
Com. unit name
CH No.
CH No.
Standard interface 2
Connection a controller
Driver name
Connecting a barcode reader, RFID controller,
or personal computer
Driver name
Driver name
(only one connection)
(1)
(3)
(8)
Standard interface 4
Connection a controller (Without multi-channel Ethernet connection)
Driver name
Connection a controller (With multi-channel Ethernet connection)
(only one connection)
(9)
Standard interface 1
Connection a controller
Driver name
(only one connection)
(7)
Driver name
Multi-channel Ethernet connection Multi
Driver name
Com. unit name CH No.
Com. unit name CH No.
Com. unit name CH No.
Com. unit name CH No.
(1)
(2)
(3)
(9)
(8)
(7)
3rd stage
2nd stage
1st stage
(Example: For GT27)
MELSERVO-J4，J3，J2S/M
RFID
1
2
3
4
5
8
Ethernet (OMRON), Gateway
OMRON THERMAC/INPANEL NEO
Barcode
GT15-RS2-9P
GT15-RS2-9P
GT15-QBUS2
Bus(Q)

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive