Mitsubishi GOT2000 Series Connection Manual

20 - 4
20. FA TRANSPARENT FUNCTION
20.2 Compatible Software
 When connecting the GOT and the personal computer by USB
(1) When connecting the GOT and PLC in bus connection
The following shows the software and the accessible PLC CPUs.
*1 MELSOFT Navigator Version 1.71Z or later is required to use the FA transparent function.
*2 GX Works2 Version 1.497T or later is required to use the FA transparent function.
*3 PX Developer Version 1.40S or later is required to use the FA transparent function.
*4 MX Component that you can use the FA transparent function is scheduled to be supported soon.
*5 The MX Sheet, please use the MX Component (will be supported soon).
*6 Setting/Monitoring tool for C Controller module Version 4.04E or later is required to use the FA transparent function. (Available
soon)
*7 GX LogViewer Version 1.32J or later is required to use the FA transparent function.
*8 QnUDVCPU•LCPU Logging Configuration Tool Version 1.32J or later is required to use the FA transparent function.
*9 MT Developer Version 1.66U or later is required to use the FA transparent function.
*10 NC Configurator that you can use the FA transparent function is scheduled to be supported soon.
*11 RT ToolBox2 Version 3.00 or later is required to use the FA transparent function.
*12 Start MR Configurator2 with MT Developer2 Version 1.66U or later.
*13 MR Configurator Version 1.23Z or later is required to use the FA transparent function.
*14 A motion controller is required between the GOT and PLC in bus connection.
PLC CPU Software
QCPU (Q mode), C Controller module
MELSOFT Navigator
*1
GX Works2
*2
PX Developer
*3
MX Component
*4
, MX Sheet
*5
Setting/Monitoring tool for C Controller module
*6
QnUDVCPU•LCPU Logging Configuration Tool
*8
QCPU (A mode), QnA/ACPU,
motion controller CPU (A Series)
MX Component
*4
, MX Sheet
*5
Motion controller CPU (Q Series)
MELSOFT Navigator
*1
MT Works2
*9
, MX Component
*4
, MX Sheet
*5
CNC CPU(Q173NCCPU)
NC Configurator
*10
Robot controller (CRnQ-700)
RT ToolBox2
*11
MELSERVO(MR-J3-B)
*14
MR Configurator2
*12*13
MELSERVO(MR-J4-B)
*14
MR Configurator2
*12*13

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive