MUTOH ValueJet User Manual

ValueJet 1304 Service manual
AP-74109 Rev 1.1 4-114
(4) Replacing VJ Take Up Unit SW Board Assembly
NOTE
Remove the screws that retains the board chassis before replacing the VJ take up unit SW board
assembly.
"(1) Removing Board Chassis" p.4-109
1. Detach the cable of the VJ Take Up Unit SW Board Assembly from the connector to the VJ take up unit
CNT board assembly.
2. Remove the screws (flat head small screw M3 × 6: 2 pieces) that retain the SW mounting plate on the
board chassis.
表 4-137
No. Part name
1 VJ take up unit CNT board
assembly
2 Cable of the VJ take up unit SW
board assembly
表 4-138
No. Part name
1 SW mounting plate
2 Screws that retain the SW
mounting plate (flat head small
screw M3
× 6)
3 Board chassis
1
2
3
1
2

MUTOH ValueJet Specifications

General

Technology	Piezo Inkjet
Ink Type	Eco-solvent ink
Print Resolution	Up to 1440 dpi
Resolution	Up to 1440 dpi
Ink Colors	CMYK, White
Media Width	64 inches
Interface	USB, Ethernet
Operating Systems	Windows