ValueJet 1304 Service manual
5-35 AP-74109 Rev 1.1
A: Print direction
B: Adjust the voltage so that the small dot printed positions (shown as dot-line) are the same with the
middle dot printed positions (in the CR direction).
C: Executed adjustment item is printed like this.
* Print pattern: Uni-D, 2-pass, 1A to 2B print
1st pass: prints middle dot
2nd pass: prints small dot
Items Speed
240 CW CW 240 CPS
320 CW CW 320 CPS
240 CCW CCW 240 CPS
320 CCW CCW 320 CPS
To Next Page
Loading...
