MUTOH ValueJet - Page 227

ValueJet 1304 Service manual
5-57 AP-74109 Rev 1.1
(1) Head Rank
This menu updates the head rank parameters. The head rank is used to determine the print head driving
voltage and correct the head temperature.
After head rank is entered, the system shifts to the Ink Charge Menu.
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
Error will occur if input value is wrong.
Press [Enter] key to retry
Initial Ink charge will not executed.
Head ID will be updated.
[Cancel]
key